酒精和软饮料
MTG LIQUORFLEX/SD
Rubber hose specifically designed for conveying high quality alcoholic beverages.
Especially suitable for liquids with a high alcohol content such as liqueurs, grappa, whisky, brandy, vodka and any kind of spirits.
MTG LIQUORFLEX/SD is suitable for conveying alcohol with a concentration up to 98%.
Suction and delivery hose.
Main benefits
- This is the perfect hose for use in distilleries and for processing beverages with a high alcohol content.
- The composition of the inner tube, odourless, tasteless and free from plasticizers, allows contamination-free transport of the fluid preserving its original organoleptic properties.
- MTG LIQUORFLEX/SD complies with the Regulations EC 1935/2004 and 2023/2006/EC (GMP).
- The MTG production cycle is free from animal derived ingredients, phthalates, adipates and materials subject to restrictions according to the current European Regulation EC 1907/2006 (REACH).
Construcion
TUBE
- UHMWPE (UPE – Ultra high molecular weight polyethylene), odourless and tasteless, light colour, mirror smooth.
- Food compliance in accordance with FDA Standards, D.M. 21/03/73 and following amendment, Reg. EU 10/2011.
REINFORCEMENT
- Plies of synthetic cord.
- Embedded steel helix wire and built-in copper wires.
COVER
- Synthetic rubber, resistant to abrasion, weatherproof, light colour, smooth, cloth finish.
- Food compliance according to FDA Standards, D.M. 21/03/73 and following amendments.
Safety factors
- ≥ 3 times working pressure.
Temperatures
- From -35°C to +90°C, depending on the fluids conveyed.
- Sterilization up to +130°C for max. 30 minutes.
Note
- The hose may also be supplied with coloured cover (blue, red, yellow, etc.), not suitable for contact with foodstuff.
Fitting
- By means of clamps, collars, crimping or other systems needed by the equipment manufacturers.
- We suggest you to use fittings with a stem free from sharp edges, in order to avoid affecting the inner tube.
Marking
Dimensional tollerance
I.D.: ISO 1307 – Wall thickness: DIN 7715 T4 S2 – Length: ISO 1307
| Internal diam. mm |
External diam. mm |
Wall thickness mm |
Working pressure BAR |
Burst pressure BAR |
Min. bending radius mm |
Vacuum BAR |
Approx. weight kg/m |
Max. length m |
|---|---|---|---|---|---|---|---|---|
| 19 | 30 | 5,5 | 10 | 30 | 90 | -0,9 | 0,6 | 40 |
| 25 | 36 | 5,5 | 10 | 30 | 110 | -0,9 | 0,73 | 40 |
| 32 | 43 | 5,5 | 10 | 30 | 150 | -0,9 | 0,9 | 40 |
| 38 | 51 | 6,5 | 10 | 30 | 180 | -0,9 | 1,25 | 40 |
| 50 | 64 | 7 | 10 | 30 | 220 | -0,9 | 1,75 | 40 |
| 63,5 | 78,5 | 7,5 | 10 | 30 | 300 | -0,9 | 2,37 | 40 |
| 75 | 91 | 8 | 10 | 30 | 400 | -0,9 | 3,1 | 40 |
| 100 | 118 | 9 | 10 | 30 | 600 | -0,9 | 4,95 | 40 |
| 65 | 81 | 8.0 | 10 | 30 | 390 | 1.48 | 40 |
| Internal diam. inch |
External diam. inch |
Working pressure BAR |
Burst pressure BAR |
Min. bending radius inch |
Vacuum BAR |
Approx. weight kg/m |
Max. length m |
|---|---|---|---|---|---|---|---|
| 3/4 | 1,18 | 150 | 450 | 3,54 | -26,57 | 0,4 | 131,2 |
| 1 | 1,42 | 150 | 450 | 4,33 | -26,57 | 0,49 | 131,2 |
| 1 1/4 | 1,69 | 150 | 450 | 5,91 | -26,57 | 0,6 | 131,2 |
| 1 1/2 | 2,01 | 150 | 450 | 7,09 | -26,57 | 0,84 | 131,2 |
| 1 31/32 | 2,52 | 150 | 450 | 8,66 | -26,57 | 1,17 | 131,2 |
| 2 1/2 | 3,09 | 150 | 450 | 11,81 | -26,57 | 1,59 | 131,2 |
| 2 61/64 | 3,58 | 150 | 450 | 15,75 | -26,57 | 2,08 | 131,2 |
| 3 15/16 | 4,65 | 150 | 450 | 23,62 | -26,57 | 3,32 | 131,2 |
The a.m. technical data refer to application at room temperature (+20°C). For other diameters and/or thicknesses available, please contact our Sales Office.
The graphic representation of the products is made for the sole purpose of illustrating the product and is purely indicative